CLINSIL™ Clean

TOMBO™ No. 1133

It can be used for a wide range of fluids such as acids, alkalis, oils, petrochemicals, organic solvents, hot oils, heat-transfer gases, and steam. (Except for some strong alkalis and acids.)
It has the best heat resistance among fluororesin gaskets.
It can also be used for parts that need electrical insulation.

SGM GASKET

TOMBO™ No. 9096-SGM

SGM Gasket is a PTFE soft type gasket made of high-strength expanded PTFE.
As it is soft and has excellent adaptability, it can easily seal slightly uneven surfaces.
It can be used for almost all fluids that do not corrode PTFE.
It can also be used as an electrical insulation gasket.

ENVELOPE GASKET

TOMBO™ No. 9010series

A PTFE-wrapped gasket that is made by covering the core material such as a joint sheet with a PTFE outer skin.
The sealed surface is completely covered in a PTFE membrane. It has excellent anti-staining properties and chemical resistance, and therefore it is used for a broad range of applications including fine chemicals, petrochemicals, the pharmaceutical and food industry, and general manufacturing.

MAKIBEE™ dannetsu

TOMBO™ No. 5520-D

“Is there a thermal insulation material out there that is resistant to fire and has a low thermal conductivity?”
“Can you improve its fire resistance as well as its thermal insulation?”
“Spray-on thermal insulation materials have inconsistent thickness and we struggle to ensure thickness-related consistency”
MAKIBEE™ dannetsu is a thermal insulation material born out of such customer feedback. For the base material, rock wool with heat resistance equivalent to MAKIBEE™ is used.

MG builpack

MG builpack is a sound-dampening thermal insulation material for non-residential buildings that has acquired non-flammable certification. It is made by adding thermosetting resin to rock wool as a binder, molding it into a mat form, and then covering the six surfaces with polyethylene film. It is best suited to lining attics for improved sound damping and thermal insulation, as well as filling wall partitions.

CERASTUCK™

TOMBO™ No. 6496

CERASTUCK is a board-shaped stack lining material with excellent heat resistance and workability. It is made by adding aggregate and inorganic reinforced fibers to its main material Xonolite (calcium silicate). It can be used for the exhaust of boilers for distributing hot water and heating as well as the exhaust of internal combustion engines of home power-generation facilities.

SUPER FELTON

TOMBO™ No. 4513 II / III

SUPER FELTON II and III are white mats with good flexibility that are made by covering the surface of a long-glass-fiber block with fabric, subjecting it to needle punching, and applying resin binder.

MG BOARD™

NICHIAS offers third types of MG BOARD: a JIS1 product to JIS3 product, which are made by adding a thermosetting resin to rock wool as a binder and molding it into a board. For the surface materials of MG BOARD 080, Nichias offers adhesive aluminum glass cloth (ALGC) and glass cloth (GC) that is affixed flat on top and around the edges.

MG BELT™

MG BELT is made by cutting MG BOARD into strips and reinforcing it with cheesecloth.
The fibers stand upright in the thickness direction, and so it has excellent flexibility and is easy to wrap around pipes and circular ducts. Nichias’ product lineup also includes a cheesecloth-affixed product and an ALGC-decorated product.

MG MIGHTY ROLL™

MG MIGHTY ROLL is a product in which minute amounts of resin are added to rock wool as a binder before molding it into a felt. ALK (aluminum craft foil) or ALGC (aluminum glass cloth) is then affixed to one side before rolling the product up into a roll.
The adhesive ALGC products comply with the Japanese Architectural Standard Specifications (Mechanical Equipment Construction Work Edition).

MG WIRED BLANKET™

MG WIRED BLANKET is a product that is made by fixing hexagonal wire mesh to one side of an MG BOARD with iron wire and rolling it up into a roll.
It has excellent workability and can be installed easily onto complex parts and curved surfaces. It is also useful as an additional heat insulation material for added thickness.

MG MIGHTY COVER™

MG MIGHTY COVER is a roll of lightweight heat insulation material that is not susceptible to bending and has excellent thermal insulation, heat resistance, and non-flammable properties.
It has low levels of halogen and so it is excellent at preventing stress and corrosion cracks in stainless steel.