ENETHERMO™ PH

TOMBO™ No. 4500-PH

A detachable jacket heater for pipe heating and heat insulation that can be used in clean rooms.
Nichias will happily handle your requests relating to matters such as heater installation, control panel installation, and secondary wiring.

GLASSMAT

TOMBO™ No. 4517

A product that is made by cutting glass fibers to a predetermined length, turning them into a felt form, and then subjecting the subsequent material to needle punching.

SILICATE MAT

TOMBO™ No. 4518

A product that is made by cutting glass fibers to a predetermined length, turning them into a felt form, and then subjecting the subsequent material to needle punching.

SUPERTEMP BOARD

TOMBO™ No. 4900

SUPERTEMP BOARD is a lightweight, highly heat-resistant, and highly heat-insulating thermal insulation material with calcium silicate as its main component.
It has excellent machinability and is widely used for industrial equipment applications.
TOMBO No.4900
SUPERTEMP Board

FA ADHESIVE/SPRAY COAT

TOMBO™ No. 9861/9871

The adhesive is used as an adhesive for various linings. There are three types available that are distinguished by the base material: FF adhesive, FC adhesive, and FM adhesive.
The spray coat (surface coating material) was developed as a surface coating material for various linings. By spraying about 1 to 2 mm onto a surface, it offers improved windspeed resistance, scale resistance, dust resistance, and alkali resistance.
*Be aware that the adhesive performance of the coating material may drop according to the usage environment.

Pyrogel™ XTE

Pyrogel XTE is a heat insulation Aerogel blanket that is made by impregnating silica Aerogel into glass fiber cloth.
Silica Aerogel is known as a material with the lowest thermal conductivity of any solid. It has features such as excellent thermal insulation properties, water repellency, flexibility, environmental safety, and ease of handling, and can achieve excellent heat insulation performance. Pyrogel XTE is an ideal heat insulation material for retaining heat in high-temperature pipes, equipment, and tanks, and is essential for pursuing the best possible thermal efficiency.

FOAMNERT™ BOARD

TOMBO™ No. 5000-TN

FOAMNERT TN is a rigid urethane foam thermal insulation material made of closed-cell foam. It is a carbon dioxide foam-based cryogenic insulation material that does not contain any chlorofluorocarbon foaming agents such as HCFCs and HFCs.
Molded products include covers and boards. Nichias’ covers are JIS-certified products (certification number GB0309002).
It can be used within the temperature range of -196°C to +100°C. It can be widely used as a thermal insulation material for LNG and LPG bases, ships, petrochemical plants, and district heating and cooling.
Note: +40°C or less is recommended for the internal temperature when using continuously.

FOAMNERT™ COVER

TOMBO™ No. 5001-TN

FOAMNERT TN is a rigid urethane foam thermal insulation material made of closed-cell foam. It is a carbon dioxide foam-based cryogenic insulation material that does not contain any chlorofluorocarbon foaming agents such as HCFCs and HFCs.
Molded products include covers and boards. Nichias’ covers are JIS-certified products (certification number GB0309002).
It can be used within the temperature range of -196°C to +100°C. It can be widely used as a thermal insulation material for LNG and LPG bases, ships, petrochemical plants, and district heating and cooling.
Note: +40°C or less is recommended for the internal temperature when using continuously.

NAFLON™ PTFE SHEET

TOMBO™ No. 9000

The NAFLON PTFE sheet is a versatile material made by compression molding a single-substance PTFE or a powdered raw PTFE material in which various inorganic fillers are mixed with the PTFE.

NAFLON™ PTFE TAPE

TOMBO™ No. 9001

It is a thin PTFE tape that is cut to a specified thickness from a cylindrical PTFE forming block. It combines PTFE’s excellent electrical properties, non-adhesiveness, and low friction coefficient.

PTFE CEMENTABLE TAPE

TOMBO™ No. 9004-K/-R

It is a cementable NAFLON PTFE tape that can be bonded with an adhesive. We have both double-sided and single-sided NAFLON PTFE cementable tape. Be aware that the bonding effect will diminish when exposed to ultraviolet rays. If you have any questions about the treatment of PTFE tapes with adhesive tape or filler, please contact us.

NAFLON™ PTFE ROD

TOMBO™ No. 9002

The NAFLON PTFE rod is a PTFE material made by molding raw PTFE powder to a specified thickness by way of either ram extrusion molding or compression molding. The rod can be cut for use as electrical or mechanical parts.