CERASTUCK™

TOMBO™ No. 6496

CERASTUCK is a board-shaped stack lining material with excellent heat resistance and workability. It is made by adding aggregate and inorganic reinforced fibers to its main material Xonolite (calcium silicate). It can be used for the exhaust of boilers for distributing hot water and heating as well as the exhaust of internal combustion engines of home power-generation facilities.

SUPER FELTON

TOMBO™ No. 4513 II / III

SUPER FELTON II and III are white mats with good flexibility that are made by covering the surface of a long-glass-fiber block with fabric, subjecting it to needle punching, and applying resin binder.

MG BOARD™

NICHIAS offers third types of MG BOARD: a JIS1 product to JIS3 product, which are made by adding a thermosetting resin to rock wool as a binder and molding it into a board. For the surface materials of MG BOARD 080, Nichias offers adhesive aluminum glass cloth (ALGC) and glass cloth (GC) that is affixed flat on top and around the edges.

MG BELT™

MG BELT is made by cutting MG BOARD into strips and reinforcing it with cheesecloth.
The fibers stand upright in the thickness direction, and so it has excellent flexibility and is easy to wrap around pipes and circular ducts. Nichias’ product lineup also includes a cheesecloth-affixed product and an ALGC-decorated product.

MG MIGHTY ROLL™

MG MIGHTY ROLL is a product in which minute amounts of resin are added to rock wool as a binder before molding it into a felt. ALK (aluminum craft foil) or ALGC (aluminum glass cloth) is then affixed to one side before rolling the product up into a roll.
The adhesive ALGC products comply with the Japanese Architectural Standard Specifications (Mechanical Equipment Construction Work Edition).

MG WIRED BLANKET™

MG WIRED BLANKET is a product that is made by fixing hexagonal wire mesh to one side of an MG BOARD with iron wire and rolling it up into a roll.
It has excellent workability and can be installed easily onto complex parts and curved surfaces. It is also useful as an additional heat insulation material for added thickness.

MG MIGHTY COVER™

MG MIGHTY COVER is a roll of lightweight heat insulation material that is not susceptible to bending and has excellent thermal insulation, heat resistance, and non-flammable properties.
It has low levels of halogen and so it is excellent at preventing stress and corrosion cracks in stainless steel.

ASLUX™ 600R

TOMBO™ No. 6462-600R

ASLUX 600R is a lightweight decorative board that is made by UV coating (ultraviolet curing treatment) a calcium silicate board and finishing it with urethane-based resin paint. The bulk density of the substrate is 0.8 and so the product is lightweight, easy to handle, and simple to machine. Its UV coating and special acrylic urethane paint finish give it excellent chemical resistance and make it maintenance-friendly.
The special acrylic urethane paint with an added antibacterial agent demonstrates excellent antibacterial performance against the likes of E. coli and staphylococcus aureus bacteria.

ASLUX™ 200R

TOMBO™ No. 6462-200R

ASLUX 200R is a decorative board that is made by UV coating (ultraviolet curing treatment) a calcium silicate board surface and finishing it with functional resin paint. As it is given special base treatment (UV coating), the surface paint demonstrates fantastic performance and it can be used in a wide range of applications from sink areas such as kitchens and toilets to the walls and ceilings of plants, hospitals, and clean rooms.
The special acrylic urethane paint with an added antibacterial agent demonstrates excellent antibacterial performance against the likes of E. coli and staphylococcus aureus bacteria.

FIRE PROOF CLOTH

TOMBO™ No. 8300

Shipyards and construction sites are constantly exposed to the risk of fires due to spatter and slag produced during welding and cutting. There may also be cases where vital equipment such as computers could be damaged. Our Fire-Proof Cloth is a dedicated spark-protection cloth developed to withstand such severe conditions.

EXCELIDE™ CURTAIN WALL

TOMBO™ No. 9551

With a machinable grade with a NAFLON PTFE base and an injection molding grade with a PPS base, the EXCELIDE series is used in various fields as a material for sliding parts.