NAFLON sliding material
TOMBO™ No. 9551
EXCELIDE™ CURTAIN WALL
With a machinable grade with a NAFLON PTFE base and an injection molding grade with a PPS base, the EXCELIDE series is used in various fields as a material for sliding parts.
The base resin is made of NAFLON PTFE or PPS, making it resistant to almost all chemicals.
(The chemical resistance differs depending on the grade.)
It is a self-lubricating sliding material that does not require lubricating.
Flame retardant properties
It corresponds to V-0 in the test of the UL94 Standard.
Low friction properties
It has low friction coefficients with a dynamic friction coefficient of 0.2 to 0.3 and a static friction coefficient of 0.05 to 0.10 (PPS series is 0.2 to 0.3), making it an ideal sliding material.
Heat resistance and cold resistance
The NAFLON PTFE series can be used from -200°C to +260°C (-200°C to +200°C for EXCELIDE X1 and X2 and -200°C to +240°C for EXCELIDE P2 and V3).
(The actual usage condition scope differs depending on the usage conditions.)
- TOMBO is a registered trademark or trademark of NICHIAS Corporation.
- Name of products with "®" are registered trademarks of NICHIAS Corporation.
- Name of products with "™" are trademarks of NICHIAS Corporation.
Calcium silicate eaves and soffit boards
ECOLUX™ (ESB)TOMBO™ No. 6458-N
Decorated rock wool sound-absorption material
MG Decorated accoustic material
Decorated rock wool heat-insulation material
MG Decorated heat-insulation material
Interior rock wool sound-dampening thermal insulation material