Fluoropolymer machined product
PTFE MACHINED PRODUCT
TOMBO™ No. 9020
PTFE MACHINED PRODUCT is a product that is made by cutting fluororesin material and machining it into shapes to suit various applications.
PTFE back-up ring
PTFE BACK-UP RING
TOMBO™ No. 9026
A ring offered in endless, bias cut, and spiral forms that are made by machining PTFE with a lathe. Nichias also has backup rings with filler material.
PTFE ball valve seat
PTFE BALL VALVE SHEET
TOMBO™ No. 9029
A ball valve seat that is made by machining PTFE and filler-filled PTFE with a lathe.
PFA roto molded container
PFA ROTO MOLDED CONTAINER
TOMBO™ No. 9947
PFA ROTO MOLDED CONTAINER is a bottle made from pure PFA using a rotation molding method. The cap is made of PTFE and can be attached to the likes of a coupler or joint to suit your application and sealed with an O-ring.
NAFLON sliding material
EXCELIDE™
TOMBO™ No. 9550
With a machinable grade with a NAFLON PTFE base and an injection molding grade with a PPS base, the EXCELIDE series is used in various fields as a material for sliding parts.
NAFLON sliding material
EXCELIDE™ CURTAIN WALL
TOMBO™ No. 9551
With a machinable grade with a NAFLON PTFE base and an injection molding grade with a PPS base, the EXCELIDE series is used in various fields as a material for sliding parts.
PTFE diaphragm valve
NAFLON™ DIAPHRAGM
TOMBO™ No. 9080
It is a diaphragm made by molding and firing PTFE powder.
The manufacturing dimensions are a maximum of ™930 mm.
Bent tube
NAFLON™ TUBE PRODUCT
TOMBO™ No. 9055-PFA
NAFLON Bent Tube is a tube that is manufactured by way of special bending machining. In addition to resolving leakage problems from using joints, it also dramatically reduces the amount of pressure loss.
*If you have any questions about PTFE tubes, please contact us.
Fluoropolymer universal expansion joint
NAFLON™ PTFE BELLOWS
TOMBO™ No. 9061-S/9061-HW/9061-GY/9062-S/9062-L/9063-S, L
Mainly for absorbing the thermal expansion and contraction of piping, it is an all-around expansion joint that uses fluororesin, which boasts many excellent attributes such as chemical resistance and heat resistance.
Please contact us if you have any questions regarding using or choosing a product.
Fluoropolymer tank lining
Fluoropolymer tank lining
As an application that utilizes the excellent chemical resistance and heat resistance of fluororesin, it is used as a corrosion-resistant lining for large-diameter tanks, stress tanks, and towers. Nichias offers PFA and PTFE fluororesins as types of lining materials, and thanks to Nichias’ various lining methods, the materials have a broad temperature range and chemical resistance, as well as excellent performance in a wide pressure range.
PTTE thread seal tape
NAFLON™ SEALTAPE
TOMBO™ No. 9082
A product made by rolling unfired PTFE into a tape form. It has a great deal of flexibility, and so it can easily seal parts with complex shapes. It is extremely user-friendly as it can be attached/detached easily without contaminating fluids. If using for a threaded joint, make sure to use a tapered screw.
Fluoropolymer slide bearing material
NAFLON™ SLIDING PAD
TOMBO™ No. 9017
Various slide bearing pads (sliding pads) are used to absorb the expansion and contraction that occurs in structures such as bridges or corridors between buildings.
NAFLON™ Sliding Pad, which uses filler-filled fluororesin (PTFE), is superior to conventional rubber pads, metal plates, roller bearings, etc. in many aspects such as low friction, high weather resistance and chemical resistance.