VERMOFLEX

TOMBO™ No. 6760-A

VERMOFLEX is a heat-expanding fireproof sheet that is made by mixing a heat-expandable inorganic material and small amounts of organic and inorganic binders with alkali earth silicate (AES) wool, and then manufacturing it into a sheet form. Its thickness expands by about three-fold when heated (when heated without a load).

LUMIBOARD

TOMBO™ No. 4720

LUMIBOARD is an asbestos-free, xonotlite-based calcium silicate board with excellent heat resistance. It has excellent machinability and is best suited as a transfer, casting, and holding type thermal insulation material for headers for troughs, spouts, floats, hot top rings in direct contact with molten aluminum alloys and holding furnaces for die casting.
There are two types of this product: L-14Z, which is the standard version, and L-100, which contains special reinforced fibers. This product is used as a material for casting parts such as hot top rings.

LUMISUL

TOMBO™ No. 4723

LUMISUL is an integrated molded product that is molded and fired into various shapes as a lining material for receptacles that come into direct contact with molten aluminum alloy.
It has excellent dryness, strength, moisture retention, and cutting properties, and as it is heated and fired beforehand, it has excellent heat stability and durability, with almost no moisture harmful to molten aluminum.

LUMICAST™

TOMBO™ No. 4722

LUMICAST is a fiber-based amorphous thermal insulation material that is designed for lining various water receivers and gutters in direct contact with molten aluminum alloys.

Silica Textile

TOMBO™ No. 8250

This is a silica cloth developed for severe conditions in high temperature ranges for which glass cloth is not compatible. Due to the high purity of the SiO2 fiber, there is little deterioration in the silica cloth even when used at high temperatures, making it particularly suitable for applications requiring heat resistance, acid resistance, and electrical insulation.

FIRE PROOF CLOTH

TOMBO™ No. 8300

Shipyards and construction sites are constantly exposed to the risk of fires due to spatter and slag produced during welding and cutting. There may also be cases where vital equipment such as computers could be damaged. Our Fire-Proof Cloth is a dedicated spark-protection cloth developed to withstand such severe conditions.

SILICATE MAT

TOMBO™ No. 4518

A product that is made by cutting glass fibers to a predetermined length, turning them into a felt form, and then subjecting the subsequent material to needle punching.

SUPERTEMP BOARD

TOMBO™ No. 4900

SUPERTEMP BOARD is a lightweight, highly heat-resistant, and highly heat-insulating thermal insulation material with calcium silicate as its main component.
It has excellent machinability and is widely used for industrial equipment applications.
TOMBO No.4900
SUPERTEMP Board

FA ADHESIVE/SPRAY COAT

TOMBO™ No. 9861/9871

The adhesive is used as an adhesive for various linings. There are three types available that are distinguished by the base material: FF adhesive, FC adhesive, and FM adhesive.
The spray coat (surface coating material) was developed as a surface coating material for various linings. By spraying about 1 to 2 mm onto a surface, it offers improved windspeed resistance, scale resistance, dust resistance, and alkali resistance.
*Be aware that the adhesive performance of the coating material may drop according to the usage environment.