RF BOARD™

TOMBO™ No. 5461

RF BOARD is a product made by adding inorganic and organic binders to alumina fiber and then molding this into a board form.
As it is made of a fiber-based board, it has little heat storage volume. It can be used to design compact furnaces thanks to its excellent thermal insulation properties and workability.
Nichias has a lineup of various dense boards that are suitable for working temperatures of 1, 400°C to 1, 800°C or parts used in such an environment.
Therefore, it performs really well as a lining material for ultra-high-temperature electric furnaces and various high-temperature furnaces.

ROSLIM BOARD

TOMBO™ No. 4350

ROSLIM BOARD H and GH are high performance heat-insulation materials that have better thermal insulation than still air and top-class workability and handling.
ROSLIM Board GH won the 2015 Energy Conservation Grand Prize

ENETHERMO™ CR

TOMBO™ No. 4500-CR

An attachable, flexible heat insulation material that can be used repeatedly for things like valves, flanges, heat exchanges, semiconductor manufacturing facilities, and other heat dissipation equipment.

ENETHERMO™ PH

TOMBO™ No. 4500-PH

A detachable jacket heater for pipe heating and heat insulation that can be used in clean rooms.
Nichias will happily handle your requests relating to matters such as heater installation, control panel installation, and secondary wiring.

NAFLON™ PTFE ROD

TOMBO™ No. 9002

The NAFLON PTFE rod is a PTFE material made by molding raw PTFE powder to a specified thickness by way of either ram extrusion molding or compression molding. The rod can be cut for use as electrical or mechanical parts.

PFA SHEET

TOMBO™ No. 9000-PFA

It can be used as a material for cutting, adhesion and welding.

PCTFE SHEET

TOMBO™ No. 9000-PCTFE

It can be used not only for gaskets and packings of a whole host of different shapes but as a processing material for various chemical and electrical equipment parts.

PFA ROD

TOMBO™ No. 9002-PFA

It can be used as a material for cutting and welding.

PCTFE ROD

TOMBO™ No. 9002-PCTFE

Taking advantage of its dimensional stability at low temperatures, it is used for packing and so on in low temperature environments. It is a material that is easy to machine thanks to its excellent mechanical strength.

NAFLON™ PFA HG TUBE

TOMBO™ No. 9003-PFA-HG

The NAFLON PFA-HG Tube is a PFA tube that uses New PFA material with little fluorine ion elusion and achieves a smooth inner tube surface by controlling the higher-order structure of PFA (grain refinement of spherulites). It is best suited to applications in semiconductor and liquid crystal industrial fields that require improved cleanliness.

NAFLON™ PFA AS TUBE

TOMBO™ No. 9003-PFA-AS

The NAFLON PFA-AS (Anti-Static) Tube is a PFA-HG tube that has a striped conductive PFA part on the inside and outer layer.
It is a tube where the fluid inside is visible and it can prevent tube insulation breakdown due to transferring the likes of organic solvents, fuels, refrigerants, powders, and steams.

NAFLON™ PFA NE TUBE

TOMBO™ No. 9003-NE

The NAFLON PFA-NE (PFA: Tetrafluoroethylene Perfluoroalkoxy Ethylene Copolymer, NE: Non-Explosion) Tube is a tube in which the outer surface of Nichias’ PFA-HG (inner surface of smooth New PFA) Tube has a striped, conductive PFA part.
Due to the isolation benefits of the conductive PFA part, it is best suited to preventing fire accidents caused by the discharge of sparks from a combustible gas atmosphere onto the outer surface of the tube.
*Winner of the Plunkett Award
Plunkett Award: An award established in 1988 to mark the 50th anniversary of the discovery of fluororesin Teflon™ by Doctor Plunkett, a scientist of DuPont™.