PTFE MACHINED PRODUCT

TOMBO™ No. 9020

PTFE MACHINED PRODUCT is a product that is made by cutting fluororesin material and machining it into shapes to suit various applications.

PFA INJECTION MOLD PRODUCT

TOMBO™ No. 9021

PFA INJECTION MOLD PRODUCT is an injection molded product made of fluororesins (PFA, ETFE, PVDF) using advanced technology and excellent quality control.
It is suitable for cost reduction through the mass production of pumps, valve parts, semiconductor and FPD manufacturing equipment parts, and electronic components.
*For questions about various super-engineering plastics (PPS, PEEK, PEI, PES, PBI), please contact us.

PTFE BACK-UP RING

TOMBO™ No. 9026

A ring offered in endless, bias cut, and spiral forms that are made by machining PTFE with a lathe. Nichias also has backup rings with filler material.

PTFE BALL VALVE SHEET

TOMBO™ No. 9029

A ball valve seat that is made by machining PTFE and filler-filled PTFE with a lathe.

PFA ROTO MOLDED CONTAINER

TOMBO™ No. 9947

PFA ROTO MOLDED CONTAINER is a bottle made from pure PFA using a rotation molding method. The cap is made of PTFE and can be attached to the likes of a coupler or joint to suit your application and sealed with an O-ring.

EXCELIDE™

TOMBO™ No. 9550

With a machinable grade with a NAFLON PTFE base and an injection molding grade with a PPS base, the EXCELIDE series is used in various fields as a material for sliding parts.

EXCELIDE™ CURTAIN WALL

TOMBO™ No. 9551

With a machinable grade with a NAFLON PTFE base and an injection molding grade with a PPS base, the EXCELIDE series is used in various fields as a material for sliding parts.

NAFLON™ DIAPHRAGM

TOMBO™ No. 9080

It is a diaphragm made by molding and firing PTFE powder.
The manufacturing dimensions are a maximum of ™930 mm.

NAFLON™ TUBE PRODUCT

TOMBO™ No. 9055-PFA

NAFLON Bent Tube is a tube that is manufactured by way of special bending machining. In addition to resolving leakage problems from using joints, it also dramatically reduces the amount of pressure loss.
*If you have any questions about PTFE tubes, please contact us.

NAFLON™ PTFE SINK

TOMBO™ No. 9500-M/-H

There are two types of NAFLON PTFE SINK: a seamless “one-piece molded square sink (TOMBO No.9500-M)” manufactured by hydraulic forming and a “welded type square sink (TOMBO No.9500-H)” that is made by welding an 8 to 25 mm sheet. Both can be manufactured with optional drainage slopes and drain holes on the bottom. The welded type, in particular, can be manufactured into shapes to suit your application without any need for a mold.

EXCELIDE™

TOMBO™ No. 9550

It is a sliding material with improved mechanical attributes such as wear resistance and creep resistance achieved by adding various filler materials to high-performance resins (PTFE, PPS) that have excellent heat resistance and low wear resistance properties.

PTFE MACHINED PRODUCT

TOMBO™ No. 9020

It is made of PTFE, which boasts excellent heat resistance and a low friction coefficient, and is cut into shapes to suit all kinds of applications.